Technical
TECHNICAL
MANUFACTURING STANDARDS

MOYO World is specialized in the product in development, production and marketing of innovative electronics production and marketing of innovative, production and marketing of innovative electronics production and marketing of innovative.

World is specialized in the product in development, production and marketing of innovative electronics production and marketing of innovative, production and marketing of innovative electronics production and marketing of innovative.

Manufacturing process
  • 01

    OrderConfirmation

    01

    Order Confirmation

    • Review order details and requirements

    • Confirm finished product specifications

    • Confirm material specification

  • 02

    Pre-Production Smaple

    02

    Pre-Production Smaple

    MATERIAL INSPECTION

    • Process high and low temperature test

    • Plug and formulation of salt spray test for metal materials

    • Single Horn Curve Test

    • Key life cycle test

    • Terminal port pull test

    • Wire swing test

    FINISHED PRODUCT INSPECTION

    • Reliability swing test

    • Reliability

    • Reliability audio curve test

    • Reliability RF test

    • Reliability Screen printing auxiliary force test

    • Function Full function test

    • Chemical testing CNAS qualification

  • 03

    Pilot-Run

    03

    Pilot-Run

    MATtERIALS

    • Materials are checked according to PP Sample confirmation test results

    • Incoming material sampling and inspection

    Production quality

    • Confirm SOP

    • IPQC

    Finished product

    • Materials are checked according to PP Sample confirmation test results

    Reliability test

    • function test

  • 04

    Mass Production

    04

    Mass Production

    MATtERIALS

    • Materials are checked according to PP Sample confirmation test results

    • Incoming material sampling and inspection

    Production quality

    • IPQC

    • 100% functional test

    OQC finished product

    • Reliability test

    • function test

    Customer inspection

  • 05

    Shipment

    05

    Shipment

OrderConfirmation

• Review order details and requirements

• Confirm finished product specifications

• Confirm material specification

Pre-Production Smaple

MATERIAL INSPECTION

• Process high and low temperature test

• Plug and formulation of salt spray test for metal materials

• Single Horn Curve Test

• Key life cycle test

• Terminal port pull test

• Wire swing test

FINISHED PRODUCT INSPECTION

• Reliability swing test

• Reliability

• Reliability audio curve test

• Reliability RF test

• Reliability Screen printing auxiliary force test

• Function Full function test

• Chemical testing CNAS qualification

Pilot-Run

MATtERIALS

• Materials are checked according to PP Sample confirmation test results

• Incoming material sampling and inspection

Production quality

• Confirm SOP

• IPQC

Finished product

• Materials are checked according to PP Sample confirmation test results

Reliability test

• function test

Mass Production

MATtERIALS

• Materials are checked according to PP Sample confirmation test results

• Incoming material sampling and inspection

Production quality

• IPQC

• 100% functional test

OQC finished product

• Reliability test

• function test

Customer inspection

Shipment
PRE-PRODUCTION SMAPLE
MATERIAL TEST

Battery Capacity Tester

Inspection method: charge at 0.5C under the environment temperature of 20℃ ± 5℃, when the battery terminal voltage reaches the charging limit voltage, change to constant voltage charging until charging If the current is less than or equal to 20mA, stop charging, leave it for 0.5 ~ 1h, and then discharge it to the termination voltage with 0.5C. After the discharge is completed, leave it for 0.5h ~ 1h, and then perform the next charge and discharge cycle. Look at the battery capacity after 3 cycles

  • High And Low Temperature Testing

    1. Equipment name: constant temperature and humidity box

    2. Equipment model: HT-150L

    3. Test object: plastic key

    4. Low temperature standard: stored at high temperature of 65℃ and humidity of 92% for 24h

    5. High temperature standard: low temperature -40℃, place for 24h

    6. Inspection method: After standing at room temperature for 2h, the test function is normal and the appearance is normal;

    Equipment name: constant temperature and humidity box

  • High And Low Temperature Testing

    1. Equipment name: constant temperature and humidity box

    2. Equipment model: HT-150L

    3. Test object: plastic key

    4. Low temperature standard: stored at high temperature of 65℃ and humidity of 92% for 24h

    5. High temperature standard: low temperature -40℃, place for 24h

    6. Inspection method: After standing at room temperature for 2h, the test function is normal and the appearance is normal;

    Equipment name: constant temperature and humidity box

  • High And Low Temperature Testing

    1. Equipment name: constant temperature and humidity box

    2. Equipment model: HT-150L

    3. Test object: plastic key

    4. Low temperature standard: stored at high temperature of 65℃ and humidity of 92% for 24h

    5. High temperature standard: low temperature -40℃, place for 24h

    6. Inspection method: After standing at room temperature for 2h, the test function is normal and the appearance is normal;

    Equipment name: constant temperature and humidity box

FINISHED PRODUCT TEST
  • High And Low Temperature Testing

    1. Equipment name: constant temperature and humidity box

    2. Equipment model: HT-150L

    3. Test object: plastic key

    4. Low temperature standard: stored at high temperature of 65℃ and humidity of 92% for 24h

    5. High temperature standard: low temperature -40℃, place for 24h

    6. Inspection method: After standing at room temperature for 2h, the test function is normal and the appearance is normal;

    Equipment name: constant temperature and humidity box

  • High And Low Temperature Testing

    1. Equipment name: constant temperature and humidity box

    2. Equipment model: HT-150L

    3. Test object: plastic key

    4. Low temperature standard: stored at high temperature of 65℃ and humidity of 92% for 24h

    5. High temperature standard: low temperature -40℃, place for 24h

    6. Inspection method: After standing at room temperature for 2h, the test function is normal and the appearance is normal;

    Equipment name: constant temperature and humidity box

Screen printing adhesion test

Inspection method: Use 810D 3M adhesive to paste and silk screen, apply 500g pressure to prevent 1 minute, quickly peel off the tape at 90 degrees, after 30 cycles Inspection standard: After the test, the silk screen is clear and easy to identify without fading