about moyo
ABOUT MOYO
PRE-PRODUCTION SMAPLE
PRE-PRODUCTION SMAPLE
MATERIAL TEST

Battery Capacity Tester

Inspection method: charge at 0.5C under the environment temperature of 20℃ ± 5℃, when the battery terminal voltage reaches the charging limit voltage, change to constant voltage charging until charging If the current is less than or equal to 20mA, stop charging, leave it for 0.5 ~ 1h, and then discharge it to the termination voltage with 0.5C. After the discharge is completed, leave it for 0.5h ~ 1h, and then perform the next charge and discharge cycle. Look at the battery capacity after 3 cycles

FINISHED PRODUCT TEST

Screen printing adhesion test

Inspection method: Use 810D 3M adhesive to paste and silk screen, apply 500g pressure to prevent 1 minute, quickly peel off the tape at 90 degrees, after 30 cycles Inspection standard: After the test, the silk screen is clear and easy to identify without fading